B22 Road Marker Adhesive is a dual-component epoxy adhesive designed for use in traffic installations. VOC-free and capable of wide-range curing, it ensures strong bonding to concrete and asphalt with no spillage.
The B22 Road Marker Adhesive is a dual-component epoxy with a 1:1 mix ratio by volume, specifically designed for the installation of raised or recessed traffic markers and traffic lane delineators. It is composed of 100% solids, free from any volatile organic compounds (VOC), and possesses the unique ability to cure efficiently across a broad temperature range. B22 has been specially formulated to achieve excellent adhesion to both Portland cement concrete and asphalt paving. The robust, thick consistency of the mixed B22 material effectively covers the substrate and marker, achieving superior bonding by filling surface imperfections without leaking into adjacent areas.
Documents: B22 Product Data, B22-A MSDS, B22-B MSDS
Basic Usage:
Ensure the substrate temperature is at least 5°F above the dew point to prevent moisture condensation and ensure the concrete is saturated, surface dry.
Avoid applying adhesive over visible moisture. Treat oil stains and old markers with sand blasting or grinding.
The use of 1:1 meter mixing equipment is efficient for applying adhesive, with a minimum of 24 elements in the static mixing head. After dispensing, use a tool to evenly spread the adhesive on the substrate and remove air bubbles.
Hand mixing, although slower, is acceptable. Equal volumes of Part A and Part B must be carefully measured. Use a drill motor and mixer for a more uniform result. Mix until the color is consistent, typically around 90 seconds. Then, scrape the mixing vessel and mix again for 30-60 seconds. The mixture can then be applied to the substrate.
Cleaning tools are necessary and can be done with a solvent such as Xylene or MEK.
Typical Uses:
| Select Product Type | Epoxy Part A & B, Epoxy Base (Part A), Epoxy Hardener (Part B) |
|---|
