E-BOND 1240/1241 is primarily designed for the placement of raised and recessed traffic markers. These tube kits may be used in a standard-sized chalking gun.
These kits make it easy to secure raised or recessed traffic markers to highways and paved surfaces. Simply combine equal amounts of Component A (resin) and Component B (hardener). The tubes are designed to fit standard caulk guns, ensuring you can apply the exact amount of adhesive you need with minimal mess.
Documents: Product Data Sheet
2 ½ inch by 4 ½ inch Rectangular Marker – 15 uses per kit.
4-inch Round/Square Marker – 12 uses per kit.
8-inch Round Marker – 3 uses per kit.
8-inch Safe-Hit Base Marker – 3 uses per kit.
Epoxy adhesive should be installed on clean, dry pavement when the ambient and surface temperatures are at least 50°F. Clear the area of dirt and debris before application. Sandblasting or grinding may be necessary to remove oil stains and existing markings.
When using this product, always combine equal amounts of Component A (pigmented white) and Component B (pigmented black). Mix until the adhesive is a smooth, uniform gray color. Do not dilute the mixture. Please note that, in ambient temperatures above 80° F, work time with the adhesive is significantly reduced.
After applying the adhesive to a traffic marker, apply firm hand pressure to the marker until a small ring of adhesive is visible around its perimeter. DO NOT step or stand on the piece to “set” the adhesive; doing so may force excessive amounts of epoxy out from under the marker and ultimately result in a weaker bond.
