Description

Thermo Sealer enhances adhesion between thermoplastic and preform thermoplastic applications. The sealer also provides a bonding surface that helps thermoplastic adhere to concrete. At 77 °F, the sealer dries in up to 15 minutes, can be handled after 1 hour, and recoated after 1 hour. This product is extremely flammable. Do not smoke, weld, or use near open flames during application. 

Note: Thermo sealer is recommended for use on all surfaces associated with thermoplastic application and is critical for adhesion to concrete surfaces. Do not apply to fresh concrete. Allow concrete to cure for a minimum of 7 days before application. For best results, allow concrete to cure for 28 days. 

Documents: Technical Data Sheet

Thermo Sealer Features:

• Packaging: 5-gallon pails and 55-gallon drums (special order only)
  
• Recommended Dry Film Thickness (DFT): 1.0–1.5 mil
  
• Dry Time (77 °F, 55% RH): To touch: 15–25 min, To handle: 1 hr, To recoat: 1 hr
  
• Application Methods: Easy-to-roll or spray application
  
• Thinning: Brush: T-42 (not normally recommended) & Spray: T-42 or xylene
  
• Film Thickness: Wet: 7.0–9.0 mil & Dry: 1.0–1.5 mil
  
• Recommended Application Equipment: Short-nap roller (1/4–3/8 in), Industrial-grade pump sprayer, and Chapin® 19069 equipped with Viton® fittings and a 0.5 GPM nozzle