This is a high-quality two-component epoxy adhesive that offers easy application and maximum holding strength.
Ensure your traffic calming devices remain secure and effective with our high-quality epoxy adhesive.
Raised pavement markers provide superior nighttime visibility for drivers in both wet and dry conditions compared to flat, painted markings. However, to be effective, these markers must withstand various weather conditions and heavy traffic without shifting, sliding, or falling over. For permanent installations, our white epoxy adhesive is one of the most durable options available. Whether you’re installing a ceramic traffic button or a plastic cycle lane separator, this adhesive guarantees that the marker will stay in place for a long time.
Our white epoxy adhesive is also offered in an easy-to-use cartridge. Please get in touch with a Transline sales representative for product recommendations.
Documents: MSDS, Product Data Sheet
When working with two-part epoxy, always mix equal amounts of Component A and Component B. If mixing by hand, be sure to achieve a smooth, even consistency before applying the adhesive to a traffic calming device or paved surface. Do not dilute the mixture.
Epoxy adhesive should be installed on clean, dry pavement when the surface temperature is at least 40°F. Clear the area of dirt and debris before application. Sandblasting or grinding may be necessary to remove oil stains and existing markings.
Once blended, white epoxy adhesive has a “pot life” of 6 to 10 minutes. Do all necessary surface preparation work (and material gathering) before mixing Component A and Component B. Only compile as much product as you need for the current job; do not attempt to store the combined mixture for later use.
