Standard Epoxy Adhesive - 10 Gallon
Standard Epoxy Adhesive - 10 Gallon

Standard Epoxy Adhesive – 10 Gallon

Standard Set Epoxy Adhesives are 100% solids, solvent-free, 2 component epoxy structural adhesive. Primarily designed for placement of Raised and Recessed traffic markers. The product may be mixed by hand or used with automatic mixing and metering equipment for apid placement of markers on highway surfaces.

  • Highway traffic button anchoring
  • Concrete repair
  • General purpose high strength adhesive
  • Chemical resistant bonding
  • Extremely durable bonds
  • Low odor and fumes
  • Fast setting
  • Premeasured packaging of components

Proper surface preparation is imperative for maximum service life. The concrete surface to be bonded should be cleaned of all dirt, oil, grease, loose particles, and previous coatings. This is best achieved by sandblasting and then vacuuming the surface. However, a simple degreasing wipe with a solvent rag will usually suffice if the integrity of the substrate is solid.

Mix equal parts by volume of Resin Part A and Catalyst Part B. It is recommended that a mechanical agitator be used, such as an electric drill with a mixing paddle attached. After mixing for at least three minutes, the epoxy may then be applied immediately.

Apply a thin, uniform film to the substrate to be bonded by the use of a trowel or putty knife. The bond requires about 2 hours of set before being placed into initial service. While most of the bond strength will be achieved in 24 hours, full cure strengths will be reached after 7 days.

B-22 Epoxy is designed to be used on substrates with surface temperatures above 50°F. If used at lower temperatures, full cure may not be achieved until the surface temperature exceeds 50°F.

Application Rates

  • 2 1/2x 4 1/2 Rect. Marker – 100 per gallon
  • 4″ Round/Square – 50 per gallon
  • 8″ Round – 15 per gallon
  • 8″ Safe-Hit Base – 15 per gallon

Safety Data Sheet

 

0 Shares
Qty:

Standard Epoxy Adhesive – 10 Gallon

Standard Set Epoxy Adhesives are 100% solids, solvent-free, 2 component epoxy structural adhesive.

SKU: d3a21d94e102 Categories: ,